

Written by:
Editorial Team
Published:
October 30, 2026
Last Updated: October 30, 2026
Quick Summary
To pack electronics for a move, back up every device, shut each one fully down, and remove discs, cards and drives first. Wrap each item in antistatic bubble wrap or soft padding, then box it snugly with cushioning on all sides. Label and photograph all cables so setup is simple at the new home.
Packing electronics starts before the first box is taped shut. Backing up every device and preparing each one before you touch a single cable saves time and protects your files in transit.
Back up computers, phones, tablets, and external drives to a cloud service or separate hard drive. Check that your backup actually opened and restored before you pack the original device.
Power down each device completely, not sleep mode. Shut it down, wait a few minutes, then unplug it.
Electronics need cushioning on every side, so buy more materials than you think you need: sturdy boxes, bubble wrap, packing paper, packing tape, and foam sheets or corners for screens and monitors.
Antistatic bubble wrap or bags are a good choice for circuit boards and computer parts, since regular plastic can build static electricity that harms sensitive components.
Choose boxes that fit each device snugly: too big lets items slide, too small puts pressure on corners. Most movers and stores sell boxes sized for electronics.
A flat-screen TV is one of the most fragile items in any move. Lay it face down on a soft, clean surface, such as a blanket on the floor.

Wrap the whole TV in moving blankets or bubble wrap, securing with tape but never taping directly onto the screen.
Carry a TV upright, never flat, and keep it upright in the vehicle. Ask for help when lifting, since a large television is heavy and awkward.
Wall-mounted TVs need extra care at the bracket. Remove the TV from the mount first, and bag the screws and small hardware in a labeled zip-top bag taped to the back of the TV.
Freestanding TVs can often be packed with the stand removed. Pack the stand separately, wrapped and labeled, and keep the base and screws together for quick reassembly.
Computers need more than a layer of bubble wrap. Treat the desktop tower, laptop, and every peripheral as separate packing jobs, because each has different fragile points.
Shut the tower down completely, then unplug the power and every peripheral cable. Photograph the back panel before disconnecting so you can rebuild connections later. If you are not comfortable opening the case, leave the components in place and pack the tower upright.
Wrap the tower in antistatic bubble wrap or a moving blanket, then set it upright in a box with at least two inches of foam or packed paper on all six sides. Never lay a tower on its side for transport; the weight of the components can shift against the motherboard. Label the box "This Side Up" and "Fragile, Computer."
Fully shut down the laptop, unplug the charger, and remove any SD cards or USB drives. Close the lid and place the laptop in a padded sleeve or case. If you no longer have the original box, use one that fits snugly and fill any gap with foam or packed paper. Lay the laptop flat, screen up, and do not stack anything on top.
Remove all paper trays, ink or toner cartridges, and loose paper before packing. If you still have the original packaging, reuse the restraints that hold the print head or carriage in place, or secure the carriage with painter's tape rather than duct tape, which can leave residue. Wrap the printer in bubble wrap and box it upright. Bag toner cartridges separately and keep them upright so they do not leak.
Unplug the console, remove any discs or game cards, and let it cool completely before wrapping, since a warm unit can trap moisture. Wrap the console in a soft cloth, then bubble wrap, and box it with padding on all sides. Keep controllers, cables, and the power brick in a separate labeled bag. Remove any disc first; a loose disc can scratch the lens assembly.
Routers, smart speakers, security cameras, and hubs are small but easy to lose. Unplug each device, photograph the port layout, and bag the power adapter with the device it belongs to. Some smart-home devices may lose network settings when unplugged for long periods, so note device names and pairing steps before you pack. Pack small devices together in one labeled box rather than scattering them across the load.
Pro Tip
Keep a "first night" box with the router, one laptop, the laptop charger, and the cables you need to get back online. Label it clearly and load it last so it comes out first.
Cables cause the most frustration at the new house. Put a small label on each cable at both ends, writing the device name and port, such as "TV HDMI 1" or "Router WAN."
Take a photo of the back of each device before you disconnect anything. Proper organization of these cords prevents unnecessary strain on delicate ports, a practice that remains equally vital when storing vintage consoles to ensure they remain functional for years to come.
This system often saves an hour or more on move-in day and reduces the chance of plugging a cable into the wrong port, which can cause damage.
The table below summarises the cable-labeling and setup steps the article describes for move-in day.
Original boxes give the best protection, but many people no longer have them. Do not worry. Our complete guide to moving fragile items safely covers protecting delicate items step by step.
Put heavier items at the bottom of the box and lighter items on top, never stack heavy boxes on electronics, and mark each box as fragile with the correct side facing up.
This is the section most moving guides skip, and it is where a move can go wrong in ways packing tape cannot fix. Handle batteries, temperature, and paperwork before the truck is loaded.
Laptops, tablets, phones, power banks, cordless tools, e-bikes, and many smart-home devices contain lithium-ion batteries. These batteries are regulated as hazardous materials when shipped, and the rules differ by mode of transport.
For air travel and air shipping, lithium-ion battery rules are set by the carrier and by federal transport authorities. Confirm the carrier's battery policy in writing before handing over any device with a lithium-ion battery.
For a ground move in a rental truck or with a moving company, the practical rules are simpler but still matter:
Watch Out
A power bank or spare battery left loose in a box with keys, tools, or loose screws can short-circuit and start a fire. Bag each battery individually and tape the terminals. For more on keeping your workspace running with minimal downtime during a move, read how to move a home office without losing a workday.
Electronics tolerate a range of temperatures, but extreme heat and cold are hard on screens, batteries, and solder joints.
Humidity matters too. A device that has been in a damp garage or a cold truck can collect condensation inside the case.
For long-distance moves and storage, pack electronics last and unpack them first so they spend as little time as possible in a non-climate-controlled space.
Moving companies typically offer different levels of liability coverage, and the basic level often pays far less than the replacement cost of a television or computer.
Your homeowners or renters policy may cover electronics in transit, but many policies exclude or limit items in a moving truck or storage.
Build an inventory before you pack:
For very high-value or irreplaceable equipment, specialized handling, crating, a dedicated electronics mover, or hand-carrying the item yourself, is often worth the cost.
Key Takeaway
Before the truck arrives: bag and tape loose batteries, confirm the carrier's lithium-ion policy in writing, choose full value protection or confirm your homeowners coverage, and finish a photo inventory with serial numbers. These four steps protect both the devices and your ability to recover their value.
Packing electronics well takes time, and many people prefer professional help. Packing services are available for those who prefer professional help. Learn how our professional packing services can handle your electronics, with full or partial options.
Our team is available around the clock, and our pricing is straightforward. You can request a free moving quote online or call to book today.
Yes. Disconnect every cable and accessory from the device before packing, then bundle each set with a zip tie or reusable twist tie and label it with the device name and port it plugs into. Keep cables inside a single labeled bag or taped to the back of the device so they do not tangle or get lost. Photographing the back of your TV or computer before you unplug anything gives you a visual reference for reconnecting later, which saves time and prevents mistakes on moving day.
Electronics can go in regular moving boxes if the box is sturdy, the right size, and fully cushioned. Use a box that fits the device with about 2 to 3 inches of padding on every side, and fill any empty space so the item cannot shift. Heavy electronics such as printers or large monitors belong on the bottom of the box with lighter padding on top. Avoid overpacking, and mark the box as fragile so handlers know to set it down gently.
Protect electronics by wrapping each device in an anti-static bag or bubble wrap, cushioning it with packing paper or foam, and keeping it away from moisture and dust. Pack screens face-down on a soft surface and never stack heavy items on top of them. Keep electronics out of the vehicle's hot or freezing areas when possible, and avoid storing them in a garage or storage unit where temperatures in Arizona can climb well above safe levels. Carrying sensitive electronics with you rather than on the truck is the safest option for high-value items.
Many people forget to back up data, pack the chargers and cables for their devices, and set aside a box of essentials for the first night. Remember to take batteries out of remotes and wireless accessories, and to pack the remote controls for your TV in a labeled bag. Check your storage, closets, and garage before the movers arrive so nothing is left behind.
GET A QUOTE
Add jacksons-moving.com as a preferred source on Google →
Read genuine feedback from our satisfied customers to understand why we are the trusted choice for moving services.
From Phoenix to communities across the Valley, Jackson's Moving is here when you need residential, commercial, or long-distance moving services. Request your free quote today.